Packing and Related Lubricants Remover

– Resists vibration
– Single part – clean and easy to apply
– Can be used on all sizes of fasteners – reduces inventory costs
– Seals threads – allows through-hole tapping

– Provide an instant, low pressure seal for all types of pipe connections
– Will not creep, shrink or block systems (including filters) by shredding
– Disassembly can be achieved easily with normal tools
– Replace all tapes and hemp/pastes combinations

– No shimming effect – controlled tolerances, no need for re-torquing
– Fill all voids – reduce the need for a fine surface finish of flanges
– Parts can be disassembled easily even after extended service
– Resists high pressure when fully cured

– High and moderate strength products – can carry high loads and eliminate fretting
– Fill all voids – prevent corrosion
– Reduce the need for close tolerances
– 100% contact – load and stress is distributed evenly over the joint

– Fixtures in seconds
– Clear bond line – good cosmetic appearance
– Versatile – dissimilar materials can be bonded
– High strength – often giving a bond stronger than the materials being bonded
– Small parts bonding

– Bond a wide variety of materials such as wood, metals, hard plastics and glass
– Provide a tough and resilient joint
– Have high shear and peel strength

– Withstand impact shock and bending
– Resist thermal expansion and contraction as well as vibration
– Have very good gap fill
– Wide temperature range
– Good weathering resistance

– Prevent seizing and galling during assembly and operation
– Inhibit corrosion and oxidation in chemically and thermally aggressive environments
– Penetrate and free corroded assemblies
– Prevent wear and cold welding during assembly and operation

– Prevent seizing and galling during assembly and operation
– Inhibit corrosion and oxidation in chemically and thermally aggressive environments
– Withstand high temperatures and extreme pressures

– Prevent seizing and galling during assembly and operation
– Inhibit corrosion and oxidation in chemically and thermally aggressive environments
– Prevent wear and cold welding during assembly and operation

– Stabilize existing rust
– Guard against corrosion
– Prevent electro-chemical corrosion
– Increase belt friction

– High compressive strength
– Choice of mild steel or aluminium fillers
– Can be machined, drilled or tapped after cure
– Excellent resistance to aggressive chemicals

– Restore worn surfaces
– Wear resistant coating
– Use on new parts to extend life
– Available in both trowelable and brushable forms

– Clean components prior to using Loctite® adhesives/sealants
– Clean and degrease worktops and parts
– Remove cured sealant residue
– The hand cleaner sub-section includes two very effective, gentle and biodegradable hand cleaners

– Accelerate cure of Loctite® products even at low temperatures
– Improve adhesion to non-wetting surfaces

– Will seal leaks in tanks and other containment vessels in addition to repairing metal parts
– Includes a kit for replacing damaged O-ring seals and a gas leak detector

– Help prevent costly breakdowns
– Increase reliability and performance
– Make any size or shape gasket
– Seal threads at low temperatures
– Prevent fretting and corrosion